Epson Stylus Pro 9860, Руководство пользователя

Страница: 29 / 101

Cutting the roll paper
There are two ways to cut the roll paper.
Method Operation
Auto cut Cut the roll paper after printing each page
automatically.
Manual cut Cut the roll paper manually, or cut the roll
paper using cutter sold at a store.
Note:
❏
Some of the roll paper may not be cut using the
built-in cutter. Use a cutter sold at a store to cut the
paper.
❏
It may take a while to cut the roll paper.
Setting the cutting method
Before printing, press the button to select cutting
method.
Icon Explanation
Roll Auto Cut On
Roll Auto Cut Off
Note:
Settings in the software RIP take priority.
Cutting the roll paper after printing
Cutting the roll paper automatically
Cut the roll paper automatically after printing each
page.
Cutting the roll paper manually
To cut the roll paper manually, follow the steps below.
A
While watching the inside of the printer over the
front cover, press the
button to feed the roll
paper and adjust the cutting position to the
mark on the left side of the print head.
B
Press the button. When the selection menu
appears, select CUT by using the or
button, and then press the button.
The paper is cut by the built-in cutter.
Note:
If the paper cannot be cut by the built-in cutter,
press the
button so the printer automatically
feeds the paper to the position where you can cut
it manually. Cut the paper using the cutter.
Epson Stylus Pro 9860 User's Guide
Paper Handling
29