Epson Stylus Pro 9860 Скачать руководство пользователя страница 75

Страница: 75 / 101

Error messages related to the printer

Error messages

Description

What to do

FRONT COVER OPEN
CLOSE FRONT COVER

The front cover is open.

Close the front cover.

INK COVER OPEN
CLOSE RIGHT AND LEFT INK COVERS

The ink cover(s) is open.

Close the ink cover(s).

INK COVER OPEN
CLOSE RIGHT INK COVER

INK COVER OPEN
CLOSE LEFT INK COVER

CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE RIGHT INK COVER?
PRESS INK COVER OPEN BUTTON

The ink cover(s) cannot be
opened.

Remove any object if it is obstructing the ink cover(s).
Then, press the

button again.

CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE LEFT INK COVER?
PRESS INK COVER OPEN BUTTON

F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER

The printer fails to update
the firmware.

Turn the printer off, and then restart the printer. Then,
update the firmware using EPSON LFP Remote Panel 2
again.

PRINTER ERROR
RESTART THE PRINTER

The printer needs to be
restarted while recovering
the error.

Turn the printer off, and after a while turn it on again.

COMMAND ERROR
CHECK DRIVER SETTINGS

The printer receives data
that is unsupported by the
printer.

Stop printing, and press the

button to cancel the

job and reset the printer.

The printer receives data
with a wrong command.

Epson Stylus Pro 9860 User's Guide

Problem Solver

Содержание Stylus Pro 9860






































































































Результаты поиска

Содержание Stylus Pro 9860

Отзывы:

Похожие инструкции для Stylus Pro 9860

Бренды по названию

Популярные бренды

Epson Stylus Pro 9860, Руководство пользователя

Результаты поиска

Содержание Stylus Pro 9860

Отзывы:

Похожие инструкции для Stylus Pro 9860

Бренды по названию

Популярные бренды