Epson Stylus Pro 7000 Series, Руководство принтера

Страница: 14 / 147

6
66
6
6 | Introduction
Important Safety Instructions
Before using your printer or RIP Station 5100, read the following safety
instructions to make sure you use the equipment safely and effectively.
•
Turn off and unplug the printer (and RIP Station 5100) before
cleaning. Clean with a damp cloth only. Do not spill liquid on the
printer (or RIP Station 5100).
•
Do not place the printer (or RIP Station 5100) on an unstable surface or
near a radiator, heating vent, or in direct sunlight. Avoid areas subject to
rapid changes in temperature and humidity or shock and vibrations.
•
Do not place the printer near a window or in direct sunlight. Bright
light can interfere with the paper sensors, causing paper jams and related
problems.
•
Keep the entire system away from potential sources of electromagnetic
interference, such as loudspeakers or the base units of cordless
telephones.
•
Place the printer (and RIP Station 5100) on a flat surface. They will not
operate properly if they are tilted or at an angle.
•
Do not block or cover the openings in the printer case (or RIP Station
5100 case) or insert objects through the slots.
•
Use only the type of power source indicated on the label.
•
Connect all equipment to properly grounded power outlets. Avoid using
outlets on the same circuit as photocopiers or air control systems that
regularly switch on and off. Do not use outlets controlled by wall
switches or automatic timers.
•
Place the printer (and RIP Station 5100) near a wall outlet where the
plugs can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
•
Do not let the power cords become damaged or frayed.
Caution
Always turn the printer
off using the
Power
button. When you press
this button, the
Operate
light flashes briefly then
goes out. Do not unplug
the printer or turn off the
power to the printer until
the
Power light is off.
This ensures that the
print head is safely
capped.