3. Load the stack of paper into the sheet
feeder with the printable side up and the
right edge of the paper flush against the
right edge guide. Slide the left edge
guide against the left edge of the paper.
Note:
❏
Always load paper into the sheet feeder short edge first.
❏
Make sure that the paper stack fits under the arrow mark inside the
edge guide.
Checking the print head nozzles
Make sure that the printer is turned
off. Hold down the
b
maintenance
button (
➀
in the illustration) and
press the
P
power button (
➁
in the
illustration) to turn on the printer.
Release only the power button, and
when the printer starts the nozzle
check, release the
b
maintenance
button.
Below are sample printouts.
If the nozzle check page does not print satisfactorily (for example, if any
segment of the printed lines is missing), then you should clean the print
head as explained below. If the printout is satisfactory, you are ready to
print directly from the PC card. Refer to Daily Use for instructions.
For the use with a computer, refer to the next step, "
Connecting the
Printer".
Segments are missing
Good sample
Print head needs to be cleaned
