Installing Ink Cartridges
This printer uses ink cartridges equipped with IC chips. The IC chip
accurately monitors the amount of ink used by each cartridge, so even
if a cartridge is removed and then inserted again, all of its ink can be
used. However, some ink from both color and black ink cartridges is
consumed each time a cartridge is inserted because the printer
automatically checks reliability.
Be sure to use the ink cartridges packed with your printer the first time
that you install ink cartridges.
Installing the Ink Cartridges
Before installing the ink cartridges, note the following:
w
Warning:
The ink cartridges are self-contained units. Under ordinary use, ink will
not leak from a cartridge. If ink does get on your hands, however, wash
them thoroughly with soap and water. If ink gets into your eyes, flush
them immediately with water.
Note:
Do not open the ink cartridge packages until just before you install them, or the
ink may dry up.
Follow the steps below to install the ink cartridges.
1. Open the output tray and the printer cover, then
turn on the printer by pressing the
P
power
button.
2. Lift up the ink cartridge clamps, as shown here.
c
Caution:
Do not move the print head by hand. Doing so may damage the
printer.
Printed in XXXX 02.xx-xx
Copyright © 2002 by SEIKO EPSON CORPORATION, Nagano, Japan.
