#"$
&
You can run a printer operation check to determine whether the problem
comes from the printer itself or some other source. If the check page
prints, the problem lies in your software or application settings, the
interface cable, or your computer. If the check page does not print
correctly, you may have a problem with your printer. See the suggestions
in this chapter for possible solutions.
1 Make sure both the printer and computer are turned off.
2 Disconnect the interface cable from the printer.
3 Make sure paper is loaded in the printer.
4 Hold down the
E
load/eject button, then press and release the
P
power
button. Continue holding down the
E
load/eject button until the
P
power light starts to flash, then release it.
The printer prints its ROM version number, an ink counter code, and a
nozzle check pattern (shown in
Examining the Nozzle Check Pattern
5 To end the check, turn off the printer. Then reconnect the interface
cable and turn on your printer and computer.
P S
flashing
B A
on
When the
P
power and
S
paper out lights
flash and the
B
black and
A
color ink out lights
come on, jammed paper
may be blocking movement of the print head. See
power and S paper out lights are flashing and the B black
and A color ink out lights are on
for more information.
P S B A
flashing
When all the lights
flash, your printer may have an internal
error. See
for more information.
Load paper that’s at
least 8.27 inches
(210 mm) wide. This
prevents ink from
spraying inside the
printer and smudging
your printouts.
Содержание Stylus Photo 750
Страница 1: ... ...