Epson Stylus Color 200, Руководство пользователя

Страница: 70 / 133

The instructions in this chapter tell you how to do the
following to maintain and care for your printer:
❑
Clean the print head
❑
Change the print head unit
❑
Replace an ink cartridge
❑
Clean the printer
❑
Transport the printer
❑
Calibrate the printer.
Cleaning the Print Head
The printer periodically cleans the print head for you, so
normally you should not need to run a cleaning cycle.
However, if print quality diminishes, run the print head
cleaning cycle to unclog the print head so the nozzles deliver
ink properly.
Follow these steps to clean either print head:
1. Make sure the printer is turned on and not printing.
2. Press the Cleaning button. The cleaning cycle takes about
one minute, during which the carriage moves and you hear
the printer recharging the print head. The
Power light
flashes throughout the cycle and then stays on when it is
finished.
3. Turn off the printer.
4. Hold down the Load/Eject button as you turn the printer
back on. This prints a demonstration page so you can see if
your print quality has improved.
5-2
Maintenance