Epson Stylus C87, Руководство по обслуживанию

Страница: 75 / 109

EPSON Stylus C87/C88/D88 Revision A
DISASSEMBLY/ASSEMBLY Dissasembly Procedures 75
4.3.3.15 Paper Guide, Upper Assy.
1) Remove the Housing, Upper Assy. (p47)
2) Move the CR Unit to the CR Motor Side. (See 4.3.3.2 Removing Holder Shaft
Unit Step 2)
3) Push the two guide pins on the Paper Guide, Upper Assy. with a flathead
screwdriver or a similar tool, and remove the Paper Guide, Upper Assy.
toward you.
Figure 4-77. Removing Paper Guide, Upper Assy.
4) Repeat the steps above, and remove all the Paper Guide, Upper Assys.
4.3.3.16 Eject Roller
1) Remove the Front Frame. (p68)
2) Remove the PF Timing Belt from the PF Drive Pulley.
3) Remove the spacer, and remove the Eject Drive Pulley.
Figure 4-78. Removing Eject Roller (1)
4) Remove the spacer that secures Bush, 6 on the right side of the printer.
5) Rotate Bush, 6 to the direction of the arrow using a longnose pliers, and
remove the Bush, 6 from the Main Unit.
Figure 4-79. Removing Eject Roller (2)
A D J U S T M E N T
R E Q U I R E D
When Paper guide upper is removed or replaced with new one, the
following adjustment must be performed in the order below.
1. Top Margin Adjustment
2. PF Adjustment
Guide Pins
Paper Guide, Upper Assy.
PF Timing Belt
PF Drive Pulley
Eject Roller
Spacer
Eject Drive Pulley
Spacer
Bush, 6