Epson Stylus C87, Руководство по обслуживанию

Страница: 14 / 109

EPSON Stylus C87/C88/D88 Revision A
PRODUCT DESCRIPTION Operator Controls 14
1.3 Operator Controls
1.3.1 Operation Switch
Operation switch is located on top center of the main unit.
1.3.1.1 Switches
There are three non-lock type push switches and three LEDs.
Figure 1-4. Control Panel
1.3.1.2 Indicators
† Power LED [Green]
Lights when the power switch is “ON” and AC power is supplied.
Flashes when data is processed or ink system is operating.
† Paper LED [Red]
Lights during the paper out/multi-feed condition, and flashes during the paper jam
condition.
† Ink LED [Red]
Lights during no ink condition, and flashes during ink low condition.
1.3.2 Panel Functions
Note *: Holding down the [Paper] switch, press [Power].
Note *: Holding down the [Power] switch, press [Ink] for about seven seconds.
Ink switch
Paper switch
Power switch
Paper LED Power LED Ink LED
Table 1-4. Panel Functions
Switch Function
Paper
• Loads or ejects paper.
• Restarts when paper jam occurred.
• In the condition of printing, cancel the print job.
Ink
• Starts the ink cartridge change sequence. Moves the
carriage to cartridge change position.
• In the condition of ‘Ink Low’, ‘Ink Out’ or ‘No Ink
Cartridge’, moves the carriage to the ink check
position.
• When the carriage is on the ink check position, moves
carriage to next ink check position or cartridge change
position.
• When carriage is on the ink change position, returns
carriage from ink cartridge change position.
Ink
(Holding down for three seconds)
• Starts the cleaning of head.
• In the condition of 'Ink Low', 'Ink Out' or 'No Ink
Cartridge', starts the ink cartridge change sequence.
Table 1-5. Panel functions with power on
Switch Pressing with Power On function *
Paper + Power Starts status printings.
Table 1-6. Panel functions with power off
Switch Pressing with Power Off function *
Ink + Power * Compulsory power off.