Epson SC-F2100 SERIES Скачать руководство пользователя страница 76

Страница: 76 / 143

Remove the charging unit, and then press the

button.

While holding down the lever shown in (1), lift
the unit straight up.

Note:

Dispose of the removed charging unit.

Disposing of Used Consumables

“Disposal” on

page 66

Place the protective cover in the orientation
shown in the illustration, and then press the

button.

Attach the protective cover so that the round hole
in the cover fits over the shaft on the printer.

Close the printer cover, and then press the

button.

The control panel screen changes to

Ready

and

so on.

Note:

If you use the printer in color ink mode for an extended
period and then switch to White ink mode, the density of
the White ink may be too weak. If the density is too weak,
try running head cleaning for the nozzles for White ink
using the

Execute (Heavy)

level. If this still does not

improve the results, contact the Epson Support.

“Cleaning the print head” on page 80

SC-F2100 Series User's Guide

Maintenance

Содержание SC-F2100 SERIES
















































































































































Результаты поиска

Содержание SC-F2100 SERIES

Отзывы:

Похожие инструкции для SC-F2100 SERIES

Бренды по названию

Популярные бренды

Epson SC-F2100 SERIES, Руководство пользователя

Результаты поиска

Содержание SC-F2100 SERIES

Отзывы:

Похожие инструкции для SC-F2100 SERIES

Бренды по названию

Популярные бренды