Epson SC-F2100 SERIES, Руководство пользователя

Страница: 118 / 143

E
Insert parts removed during the setup.
Setting up the Printer After
Moving
Follow the steps below to use the printer after moving.
A
Check that the location is suitable for
installation.
U
Setup Guide (booklet)
B
Install the waste ink tube and the waste ink bottle.
U
Setup Guide (booklet)
C
Connect the power plug to an electrical outlet,
and then turn on the printer.
U
Setup Guide (booklet)
D
Perform a nozzle check and confirm that there
are no clogged nozzles.
U
“Checking for clogged nozzles” on page 78
E
Adjust the print head misalignments, and then
check the print quality.
U
“Correcting the print misalignment” on
page 82
Transporting the Printer
When transporting the printer, protect the printer from
shock and vibration using the protective materials and
packing materials used when it was initially delivered
after preparing the printer for the move.
U
“Preparing to Move” on page 117
See the Setup Guide (booklet) to attach the protective
part to the movable base that were originally attached
when the printer was delivered.
U
Setup Guide (booklet)
Caution:
When transporting the printer, do not tilt it, stand it
on its side, or turn it upside down. Otherwise ink
could leak out.
After transporting the printer, set it up following the
same steps as after moving the printer.
U
“Setting up the Printer After Moving” on
page 118
Printable area
Type Available Area
L size platen 16 x 20 inches (406 x 508 mm)
M size platen 14 x 16 inches (356 x 406 mm)
S size platen 10 x 12 inches (254 x 305 mm)
XS size platen 7 x 8 inches (178 x 203 mm)
Sleeve platen 4 x 4 inches (102 x 102 mm)
Medium grooved platen Refer to illustration of areas
that cannot be printed
SC-F2100 Series User's Guide
Appendix
118