Epson SC-F2100 SERIES, Руководство пользователя

Страница: 46 / 143

E
Remove any lint from the printing surface, and
press the fibers flat.
There may be lint on the T-shirt if you have not
applied pre-treatment liquid. Remove the lint
using the sticky tape or roller and press the fibers
flat using the hard roller. Lint and fibers may stick
to the print head and stain other areas.
F
Remove any slack or creases from the printing
surface and make it flat.
Use the grip pad tool supplied to flatten the
printing surface. The T-shirt sticks to the grip on
the platen keeping it flat and preventing it from
moving during printing.
Press the T-shirt lightly with the grip pad tool and
move it vertically and horizontally from the
edges as shown in the following illustration.
Repeat this step 2 to 3 times to remove any slack
or creases and make the printing surface flat.
When loading a T-shirt coated with
pre-treatment liquid, or when the grip pad tool
gets caught due to the characteristics of the
fabric, use the grip pad tool with a release sheet
such as silicon paper on the T-shirt as shown in
the figure.
SC-F2100 Series User's Guide
Basic Printing
46