
42
Connecting to an External Computer Monitor
If you connected a computer to the projector's
Computer
or
BNC
port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On
as the
Standby Mode
setting and
Always On
as the
A/V Output
setting in the
projector's Extended menu.
Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1.
Make sure your computer is connected to the projector's
Computer
or
BNC
port.
2.
Connect the external monitor's cable to your projector's
Monitor Out
port.
Note:
If you do not see an image on the external monitor, you may need to change the
Monitor Out
setting in the Extended menu.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector to external self-powered
speakers. You can control the volume using the projector's remote control.
You can also connect the projector to an amplifier with speakers.
Содержание Pro L1060U
