Epson GP-C830 Скачать руководство пользователя страница 8

Страница: 8 / 114

Chapter 2

Safety Instructions

Warnings, Cautions, and Notes

Warnings

must be followed carefully to avoid bodily injury.

Cautions

must be observed to avoid damage to your equipment.

Notes

contain important information and useful tips on the operation of your printer.

Important safety instructions

Read all of these safety instructions before using the printer. In addition, follow all warnings and
instructions marked on the printer itself.

When setting up the printer

Warning:

Use the specified AC Adapter (EPSON AC Adapter K, Model: M248A) only.

❏

Do not place the printer on an unstable surface or near a radiator or heat source.

❏

Place the printer on a flat, stable surface. Tilting or placing the printer at an angle may adversely
affect the print quality.

❏

Do not place the printer on a soft, unstable surface like a bed or a sofa, or in a small, enclosed area,
as this restricts ventilation.

❏

Do not block or cover the slots and openings in the printer’s cabinet, and do not insert objects
through the slots.

❏

Leave adequate room around the printer for easy operation and maintenance.

GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide

Safety Instructions

Содержание GP-C830



















































































































Результаты поиска

Содержание GP-C830

Отзывы:

Похожие инструкции для GP-C830

Бренды по названию

Популярные бренды

Epson GP-C830, Руководство пользователя

Результаты поиска

Содержание GP-C830

Отзывы:

Похожие инструкции для GP-C830

Бренды по названию

Популярные бренды