You can check the printer status in this window.
Note:
It might not be possible to retrieve the printer status during printing. In this situation, click the
EPSON
Status Monitor 3
button in the Utility tab, and use the printer with the status window left open.
Setting the Auto Tear-Off Function
You can select whether to turn on the auto tear-off function. When the auto tear-off function is turned
on, the printer advances the continuous paper to the tear-off position automatically when a set time
has passed after printing.
1. Access the printer driver. See “Using the Printer Driver” on page 26.
2. Click the
Utility
tab, and then click the
Auto Tearoff Setting
button.
3. Select
auto tearoff enabled
and select the delay time box, or select
auto tearoff disabled
.
4. Click
OK
.
Setting the Buzzer
Setting whether the buzzer sounds when printing is finished
1. Access the printer driver. See “Using the Printer Driver” on page 26.
2. Click the
Utility
tab, and then click
Other Config
.
3. Select the
Control Buzzer Settings
check box, and then select
Every Page
or
Only Last Page
in
the Control Buzzer Settings drop-down list to have the buzzer sound when printing is finished.
Clear the
Control Buzzer Settings
check box to have the buzzer not sound.
4. Click
OK
.
5. Click
OK
.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Printer Software
35
