Epson G5000 - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 24 / 116

24
Setting Up the Projector
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 28).
Follow these steps to turn on the projector:
1. Remove the lens cover.
2. Plug one end of the power cord into the projector, and the other
end into an electrical outlet.
The
P
power light turns orange.
note
You can set the projector to
automatically turn off the
lamp and enter “sleep mode”
when it has not received any
signals for 10 minutes (see
page 60 to enable, disable,
or adjust this setting). This
conserves electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the
P power button. If
you are done using the
projector, unplug the power
cord.
Power light