The Root Certificate Needs to be Updated
The root certificate has expired.
Solutions
Run Web Config, and then update the root certificate.
Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8
There is a problem with your AirPrint setup.
Solutions
Run Web Config, and then select
Port9100
as the
Top Priority Protocol
setting in
AirPrint Setup
. Select
System Preferences
from the Apple menu >
Printers & Scanners
(or
Print & Scan
,
Print & Fax
), remove
the printer, and then add the printer again.
&
“Application for Configuring Printer Operations (Web Config)” on page 212
An Error Code is Displayed on the LCD Screen
A code is displayed on the LCD screen if there is an error or information that requires your attention.
Code
Situation
Solutions
E-01
A printer error has occurred.
Open the scanner unit and remove any paper or protective material
inside the printer. Turn the power off and on again.
E-02
A scanner error has occurred.
Turn the power off and on again.
E-11
An ink pad needs to be replaced.
Contact Epson or an authorised Epson service provider to replace the
ink pad*. It is not a user-serviceable part.
However, non-printing features such as scanning are available.
W-01
A paper jam has occurred.
Remove the paper from the printer and press the button displayed on
the bottom of the LCD screen to clear the error. In some cases, you
need to turn the power off and on again.
W-11
An ink pad is nearing the end of its
service life.
Contact Epson or an authorised Epson service provider to replace the
ink pad*. It is not a user-serviceable part. The message will be
displayed until the ink pad is replaced.
Press the
x
button to resume printing.
I-22
Set Wi-Fi from the
Push Button
(WPS)
.
Push the access point button. If there is no button on the access
point, open the access point setting window, and then click the
button displayed in the software.
I-23
Set Wi-Fi from the
PIN Code (WPS)
.
Enter the PIN code displayed on the LCD screen into the access point
or computer within two minutes.
I-31
Set Wi-Fi from the
Wi-Fi Auto
Connect
.
Install the software on your computer, and then press the OK button
when Wi-Fi setup starts.
>
An Error Code is Displayed on the LCD Screen
149
Содержание ET-M2120 Series
