Epson EB-L1490U, Руководство пользователя

Страница: 3 / 296

Make sure you read the following before you use the projector.
s
Safety Instructions
Warning and Cautions on Installation
An optional ceiling mount is required when suspending the projector from
a ceiling.
s
"Optional Accessories" p.242
Warning
•
Do not use or install the projector where it may be subject to water or rain,
or high humidity, such as outdoors, in a bathroom, or shower room, and so
on. Otherwise, it could cause a fire or electric shock.
•
Do not install in locations where it could be subject to salt damage, or in
locations subject to corrosive gas such as sulphuric gas from a hot spring.
Otherwise, the projector could fall due to corrosion. It could also cause
damage to the projector.
•
A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If installation work is not carried out
correctly, the projector could fall down. This may result in injury or
accidents. Contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s
Epson Projector Contact List
•
If you use adhesives on the ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause an accident or injury to anyone under the ceiling
mount.
When installing or adjusting the ceiling mount, do not use adhesives,
lubricants, oils, and so on to prevent the screws from loosening.
Warning
•
Failure to install the ceiling mount and projector may cause the projector to
fall.
After installing the specific Epson mount that supports your projector, make
sure you secure the projector and the mount using wire that is strong enough
to hold their weight.
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
•
Do not place flammable objects in front of the lens. If you set the schedule to
turn on the projector automatically, any flammable objects placed in front of
the lens could cause a fire.
•
Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.
•
Only use the specified power-supply voltage. Otherwise, it could cause a fire
or electric shock.
•
Be careful when handling the power cord. Otherwise, it could cause a fire or
electric shock. Note the following when handling the power cord.
- Do not plug multiple power cords in a single electric outlet.
- Do not plug in the power cord if there are any foreign substances, such
as dust, stuck to it.
- Make sure you insert the power cord all the way in.
- Do not plug in or unplug the power cord with wet hands.
- Do not pull the cord when unplugging the power cord. Make sure you
hold it by the plug.
•
Do not use a damaged power cord. Otherwise, it could cause a fire or electric
shock. Note the following when handling the power cord.
- Do not alter the power cord.
- Do not place any heavy objects on the power cord.
- Do not bend, twist, or pull the power cord forcibly.
- Do not layout the power cord near a heating device.
Safety Warning and Cautions
3