Epson EasyMP EMP-735, Руководство по установке

Страница: 7 / 223

6
Functions
If a wireless LAN system is already installed in an office, use the "Access point
mode" to share projectors from a participating computer via the company network.
Monitoring Projector Errors with EMP Monitor and SNMP
Using the "EMP Monitor" provided on the included CD-ROM, it is possible to
simultaneously monitor and control the projector from a computer, when using
"Access point mode" to connect to a computer on a wireless LAN. The monitoring
function monitors the error state, power status, and input status of the projector. The
control function performs simultaneous start-up, and image signal input switching
of multiple projectors. Using EMP monitor, it is possible for a single operator to
control the simultaneous starting and monitoring of projectors arranged in separate
classrooms or meeting rooms.
You can also use SNMP to monitor and control the status of projectors from a
computer. SNMP creates a notification message when an abnormal condition occurs
on a projector, and sends the notification to a computer identified by a pre-defined
IP address.
* In order to monitor a projector using SNMP, you need to first install SNMP
management software on the computer.
Connecting Via an Access Point in a Wireless LAN