Epson EasyMP EMP-735, Руководство по установке

Страница: 34 / 223

33
E
nglish
The EMP NS Connection toolbar is displayed on the computer screen. Use the
toolbar to operate the projector, change options and settings, and disconnect
from the network.
p.35
If the toolbar is in the way during a presentation, you can minimise it. You can
perform projector operations and setup using the remote control.
See
"Selecting the Colour Mode" and "Advanced Operations" in the EMP-735
User's Guide .
See "Adjusting the Screen Image" and the subsequent material, in the EMP-
735 User's Guide to further adjust the projected images and perform other
functions.
Tip :
To connect to a different computer when changing presenters, start EMP NS Connection
on the selected computer and connect. The connection with the current connected
computer will be terminated , and the next computer will be connected.
When projecting images from a computer using the Network Screen, the following
requirements must be met. Please ensure that you meet these requirements.
Supported Resolution
Computer screen resolutions that can be projected are shown below. If the
resolution is on this list, the computer images may be directly projected. You cannot
connect to a computer with a resolution higher than SXGA.
• VGA (640×480)
• SVGA (800×600)
• XGA (1024×768)
• SXGA(1280×960)
• SXGA (1280×1024)
If the computer resolution is higher than XGA, the following message is displayed
when projecting: "Image transfer performance will be affected if PC resolution is
higher than XGA (1024 × 768 pxl.) or images use more than 24 bits. Do you want
to continue connection?". If you click "Yes", the connection is made, but display
speed will be slower.
If a computer with a special screen size is used where the ratio of height - width is
not represented on the previous list, such as 1280 × 600, a screen resolution to
project images that matches the width dimension is selected from the five choices.
In this case, the empty margins are black.
Connection Restrictions