Epson EasyMP EMP-735, Руководство по установке

Страница: 47 / 223

46
Connecting in Access Point Mode
DHCP Indicates DHCP use.
Set "ON" to use DHCP.
Set "OFF" to not use DHCP.
IP address This can be entered when "OFF" is selected in "DHCP".
Enter the IP address assigned to the projector.
Numbers between 0-255 can be selected for each of the fields
of the address.
Subnet mask
This can be entered when "OFF" is selected in "DHCP".
Enter the subnet mask for the projector.
Numbers between 0-255 can be selected for each of the fields
of the address.
Gateway
address
This can be entered when "OFF" is selected in "DHCP".
Enter the gateway IP address for this projector. Numbers
between 0-255 can be selected for each of the fields of the
address.
SNMP trap IP
address 1 Enter the IP address of the computer notified of an SNMP
trap . Numbers between 0-255 can be selected for each of
the fields of the address.
Select the "Clear" button, and press the [Enter] button on the
remote control to clear the entered trap IP address.
SNMP trap IP
address 2
Enter the IP address of the computer notified of an SNMP
trap. If notification does not arrive at the IP address
designated by " SNMP trap IP address 1", notification is sent
to this IP address. Numbers between 0-255 can be selected
for each of the fields of the address.
Select the "Clear" button, and press the [Enter] button on the
remote control to clear the entered trap IP address.
MAC address
Displays the wireless LAN card MAC address.