Epson C11C640001 - LX 300+II B/W Dot-matrix Printer, Справочное руководство

Страница: 45 / 129

Using the Printer Software
45
Setting Up Your Printer on a Network
If the printer will be shared over a standard Windows network,
follow the instructions in this section to set up the printer server
and client computers.
The computer that is directly connected to the printer is the
printer server, and the other computers are the clients which
need permission to share the printer with the printer server.
Note:
❏
When sharing the printer, be sure to set EPSON Status Monitor 3
so that the shared printer can be monitored on the printer server.
See “Setting up EPSON Status Monitor 3” on page 42.
❏
When you are using a shared printer in Windows 98 or Me, on the
server, double-click the
Network icon in the Control panel and
make sure that the “File and printer sharing for Microsoft
Networks” component is installed. Then, on the server and clients,
make sure that the “IPX/SPX-compatible Protocol” or the “TCP/
IP Protocol” is installed.
❏
The printer server and clients should be set on the same network
system, and they should be under the same network management
beforehand.
Setting up the printer server
To set up the printer server, follow the steps in the appropriate
section below:
❏
For Windows 98 or Me, see the following section.
❏
For Windows 2000, XP, or NT, see page 47.