Epson C11C640001 - LX 300+II B/W Dot-matrix Printer, Справочное руководство

Страница: 32 / 129

32
Paper Handling
❏
To remove the labels from the printer, tear off the fresh
supply at the back of the printer; then press the
LF/FF button
to advance the remaining labels out of the printer.
c
Caution:
Never feed labels backward through the printer; they can easily
peel off the backing sheet and jam the printer.
Envelopes
You can feed envelopes individually using the paper guide.
Keep the following tips in mind:
❏
Set the paper thickness lever to the proper position. See
page 29.
❏
To load an envelope, follow the steps on page 26 for printing
a single sheet. Insert the wide edge of the envelope into the
printer first, printable-side down. When you insert the
envelope between the edge guides, push it firmly and hold it
until it feeds into the printer.
❏
Use envelopes only under normal temperature and
humidity conditions.
❏
Make sure the printing stays entirely within the printable
area.
❏
The print head must not go past the left or right edge of the
envelope or other thick paper. It’s a good idea to print a test
page using a normal single sheet of paper before you print
on envelopes.