Using the Control Panel
67
Changing the Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting
from the printer’s control panel using the Default Setting mode.
The following table lists the default settings and the options you
can select in Default Setting mode. The settings are explained in
detail after the table. For instructions on using Default Setting
mode, see page 72.
Settings
Options
Page length for tractor
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11
,
70/6, 12, 14, 17
Skip over perforation
On,
Off
Auto tear off
On,
Off
Auto line feed
On,
Off
Print direction
Bi-D
, Uni-D
Software
ESC/P
, IBM 2380 Plus
0 slash
On,
Off
High speed draft
On
, Off
I/F mode
Auto
, Parallel, Serial, USB
Auto I/F wait time
10 seconds
, 30 seconds
Baud rate
19200
, 9600, 4800, 2400, 1200, 600, 300 BPS
Parity
None
, Odd, Even, Ignore
Data length
8 bit
, 7 bit
Parallel I/F bidirectional
mode
On
, Off
Packet mode
Auto
, Off
Содержание C11C640001 - LX 300+II B/W Dot-matrix Printer
Страница 1: ...9 pin Dot Matrix Printer Reference Guide ...
