Epson AcuLaser M7000 Series, Руководство пользователя

Страница: 65 / 199

Item Settings (default in bold)
Duplex
*1 *2
Off , On
Binding
*1 *2
Long Edge , Short Edge
Start Page
*1 *2
Front , Back
Skip Blank Page
*3
Off , On
Auto Eject Page
*4
Off , On
Size Ignore
Off , On
Auto Cont
Off , On
Page Protect
*3
Auto , On
A4/LT Auto Switching
On , Off
Toner Alert Skip , Set
LCD Contrast 0 to 7 to 15
RAM Disk
*1 *5 Off , Normal, Maximum
Confirm Media Type No , Yes
Job Info. Display Pattern 1, Display Pattern 2, Off
*1
Available only when the corresponding option is installed.
*2
Available only when you use A4, A3, A5, B4, B5, LT, HLT, LGL, GLG, B, EXE, or F4 size paper.
*3
Available only for ESCP2, FX, or I239X mode.
*4
Not available in PS3 and PCL.
*5
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again.
Language
Specifies the language displayed on the LCD panel and that printed on the status sheet.
Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data is
being received from an interface until the point of switching the interface. If the printer has a print job
when switching the interface, the printer prints the print job.
MP Mode
Epson AcuLaser M7000 Series User's Guide
Using the Control Panel 65