Epson AcuLaser Color 2000, Руководство по обслуживанию

Страница: 34 / 204

EPSON AcuLaser C2000 Revision C
Product Descriptions Interface Specifications 34
1.3 Interface Specifications
The AcuLaser Color 2000 is equipped with the following host interfaces.
„
Parallel Interface (Standard)
„
Ethernet Interface (Standard)
„
Optional Host Interface (Type B) - 1 slot
Figure 1-3. Host Interface Location
NOTE: Use/no use can be set for each host interface separately.
1.3.1 Parallel Interface Specifications
†
Interface Type IEEE 1284 Bi-directional High Speed Parallel
Interface
†
Operating Modes Compatibility, Nibble, ECP
†
Connector Type Name 57RE-40360-830B (D7A) DDK or the same class
of product.
†
Compatible Plug Amphenol or comparable products.
The initial value for this printer Device ID is as shown below. In the
following description, in order to make it easier to read, carriage returns
have been added, but actually, the character string is continuous without
carriage return codes being included. The CMD items are not in the same
order. MODE and STATUS items are not included. In the contents of DES
items, MFG and MDL are connected by a space.
MFG:EPSON;
CMD:PJL,EJL,ESCPL2,ESCP9,PRPXL24-01,PCL,HPGL2-01,ESCPAGE-
04,ESCPAGECOLOR-01**
1
;
MDL:**
2
;
CLS:PRINTER;
DES:EPSON**
2
;;
**1 “PostScript” is added only when the PostScript 3 module is
installed.
**2 AL-C2000
Furthermore, it is possible to redefine the MFG, MDL, DES and CID in the
Device ID. Also, the CID Field does not respond with the default value, but
does respond with the defined character string if it has been redefined.
The Device ID when redefined is as follows. Places with ***** are the
user defined character strings.
MFG:*****;
CMD:PJL,EJL,ESCPL2,ESCP9,PRPXL24-01,PCL,HPGL2-01,ESCPAGE-
04,ESCPAGECOLOR-01**
1
;
MDL:*****;
CLS:PRINTER;
DES:*****;
CID:*****;
1)
2)
Optional Interface
Ethernet Interface
(100Base TX/10Base T)
Parallel Interface
(IEEE 1284 B-type)
Link/Receiving Lamp ( Green)
100Base/10Base Lamp (Orange)