25
4.1.2 Switching On/Off VAQUITA Battery
Power Button
Figure 4-2
The below table indicates how to switch on/off VAQUITA Battery.
Operation
Description
Switch on
In power-off state, press the power button and hold until all
LEDs light up one by one. Then release the button.
The battery will fail to be switched on if the power button is re-
leased before all LEDs light up.
Switch off
In power-on state, press the power button and hold until all
LEDs light off one by one. Then release the button.
The battery will fail to be switched off if the power button is re-
leased before all the four LEDs light off, and all the four LEDs
will flash simultaneously.
Before mounting VAQUITA Motor, make sure VAQUITA Battery is
switched off, and the connectors are dry.
Before switching on VAQUITA Battery, make sure VAQUITA Motor is
safely mounted on the bottom of the SUP board/kayak, etc.
If no electrical activity is detected within an hour after the battery is
switched on, the battery will enter sleep mode automatically, and the
LEDs will all go out. The battery should be restarted if it is going to be
used again.
If communication breaks (eg. the remote control is turned off), the
battery LEDs will flash in pair. When communication resumes, the LEDs
will display real-time battery level.
Содержание VAQUITA
Страница 1: ...VAQUITA USER MANUAL Feb 2019 Version 1 1 Copyright 2019 ePropulsion All Rights Reserved ...
Страница 2: ......
Страница 44: ......
Страница 45: ......