ePropulsion VAQUITA, Руководство пользователя

Страница: 28 / 46

26
4.1.3 Charging the Battery
Important notes before charging
Only use VAQUITA Charger to charge VAQUITA Battery. Do not use
any third-party chargers.
Only charge the VAQUITA Battery in within 0
˚C~45˚C (32 ˚F~113 ˚F).
Avoid water contact during charging process.
Avoid direct sun/rain exposure during charging process.
Do not overcharge the battery.
Keep the battery away from flammable substance like a carpet or wood
during charging process.
In case of emergency, please stop charging the battery immediately.
Charge VAQUITA Battery following the below steps:
1) Power off the battery, disconnect the battery power cable with the motor.
Remove the battery off the SUP board/kayak and take it to a dry and safe
place.
2) Plug the output cable of VAQUITA Charger into the charge/discharge port
of VAQUITA Battery and tighten the connector. Then plug the input cable
of VAQUITA Charger into the socket. Please refer to
4.1.1 Battery LEDs
for LED charging status.
Figure 4-3
Indicator Normal Status Description
Charger
indicator
Solid red light The charger works well.
Solid green light
The charger works well but has not been
plugged into the power socket, or the
battery has been fully charged.
It is recommended to fully charge the battery before each use as self-
discharge may occur in the process of transportation and storage.
It takes about 3 hours to fully charge a depleted battery. If fully charged,
the LEDs will light off in half an hour.