24
If the battery is between 0% ~ 20% when discharging, all LEDs will flash
simultaneously to remind you to charge the battery ASAP.
If the LEDs present abnormal flashing states, please check the below
troubleshooting table for proper solutions.
Abnormal LED States
Errors
Solutions
L0
L1
L2
L3
Error1:
VAQUITA
Remote Control
communication
failure
1. Make sure the remote
control is powered on.
2. Please refer to
section 4.3
Pairing VAQUITA Remote
Control with VAQUITA
Battery
to conduct pairing.
Error2:
VAQUITA Battery
communication
failure
Please restart the VAQUITA
Battery.
Error3:
Other errors of
the battery
Please restart the VAQUITA
Battery.
Error4
:
VAQUITA Battery
over-temperature
Stop operation and wait
until the temperature falls
within the normal operating
temperature range.
Note: refers to flashing light (an interval of 0.2s, a frequency of 5Hz).
If error1 occurs, L0 and L1 flash alternately with L2 and L3.
If an error occurs in a non-charging state, the LEDs will display the
battery level (for 3s) and the error (for 3s) alternately.
If multiple errors occur simultaneously, the errors will be displayed in
this priority sequence: Error4 Error3 Error1 Error2.
Error4 VAQUITA Battery over-temperature may occur during charging.
If the error persists, please consult the authorized dealers for help.
Содержание VAQUITA
Страница 1: ...VAQUITA USER MANUAL Feb 2019 Version 1 1 Copyright 2019 ePropulsion All Rights Reserved ...
Страница 2: ......
Страница 44: ......
Страница 45: ......