ePropulsion VAQUITA, Руководство пользователя

Страница: 23 / 46

21
3.3 Connecting Battery to Motor
Flip the SUP board/kayak, etc. over after the motor is firmly installed. Plug
the motor cable connector into the charge/discharge port of VAQUITA
Battery and tighten the connector. Fix the power cable with a Velcro tape.
Fix the power cable on the
SUP with a Velcro tape
Plug the power cable into
the charge/discharge port
Figure 3-11
Pay attention not to hit the thruster against the ground or other objects
while turning the SUP board/kayak, etc.
Make sure VAQUITA Battery is switched off and the connectors are dry
before installing the motor.
3.4 Attaching VAQUITA Remote Control
VAQUITA Remote Control can be attached to a paddle or wrist for easy
access. You need to penetrate the band through the side opening of
VAQUITA Remote Control and bind the strap tightly around the wrist or
paddle as shown in Figure 3-12.
Make sure the band is tightly bound if you wear it or attach it to a paddle
to avoid it falling into water.
If VAQUITA Remote Control falls into water by accident, a wireless
communication failure may occur and VAQUITA Motor will stop rotation
at once.