ePropulsion VAQUITA, Руководство пользователя

Страница: 19 / 46

17
2) Turn the SUP board/kayak bottom up to attach the inflatable SUP fin box.
①
Slide the standard adapter fully into the fin box.
②
Insert the retaining clip to lock the adapter (Figure 3-4).
1
retaining clip
2
Figure 3-4
Do not force the adapter into the fin box. If the adapter can’t fit into the
fin box properly, slide it out and check if the installing direction is correct.
The propeller should face the tail of the SUP board/kayak, etc.
Make sure the fin box is clean before installing the motor.
3.1.2 Installing with VAQUITA Universal Adapter
If the SUP board/kayak, etc. has no fin box or if both the two standard
adapters can’t fit into the existing fin mounting system, it’s suggested to use
VAQUITA universal adapter to attach VAQUITA Motor.
①
Turn the SUP board/kayak, etc. bottom up.
②
Penetrate the two ratchet straps through the side opening of the universal
adapter and attach the universal adapter onto the relatively flat part on
the bottom.