Brakes
o Ensure front and rear brakes work properly.
o Ensure brake pads are not over worn and are correctly positioned in relation to the rims.
o Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.
o Ensure brake control levers are lubricated and tightly secured to the handlebars.
Wheels and Tires
o Ensure tires are inflated to within the recommended limits displayed on the tire sidewalls.
o Ensure ties have tread and have no BULGES OR EXCESSIVE WEAR.
o Ensure rims run true and have no obvious wobbles or kinks.
o Ensure all wheel spokes are tight and not broken.
Steering
o Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.
o Ensure the handlebar is set correctly in relation to the forks and the direction of travel.
Chain
o Ensure the chain is oiled, clean and runs smoothly.
o Extra care is required in wet or dusty conditions.
Cranksand Pedals
o Ensure pedals are securely tightened to the cranks.
o Ensure the cranks are securely tightened and are not bent.
Derailleurs
o Check that the derailleur(s) are adjusted and functioning properly.
o Ensure shift and brake levers are attached to the handlebar securely.
o Ensure all brake and shift cables are properly lubricated.
Motor Drive Assembly and Throttle
o Ensure hub motor is spinning smoothly and the motor bearings are in good working order.
o Ensure all power cables running to hub motor are secured and undamaged.
o Make sure the hub motor axle bolts are secured and all torque arms and torque washers are
in place.
Battery Pack
o Ensure battery is charged before use.
o Ensure there is no damage to battery pack.
o Lock battery to frame and check to see that it is secured.
·
5
·
