The power-savingfunction can only be used when the user pushes the electric
bike. Do not use it while riding.
!
◆
Press and hold the “—” button to hold it down. After 2 seconds, the electric bike enters the power assist mode. The electric bike travels at a
constant speed of 6 kilometres per hour. At the same time, the screen displays “WALK”. Release the “—” button and the electric bike will
immediately stop the power output and return to the state before the boost.
◆
Press and hold the “
” button for 2 seconds,the instrument backlight is turned on, and the controller is
notified to turn on the headlights. When the external light is insufficient or driving at night, the LCD backlight
can be turned on. Press and hold the “
”button again for 2 seconds to turn off the LCD backlight and notify
the controller turns off the headlights.
◆
Press the “+” or “—” button to switch the power assist position of the electric vehicle and change the output
power of the motor. The default output power range of the meter is 0-5,the 0 position is the stop power
output, the 1st gear is the lowest power, and the 5th gear is the highest power. When the 5th gear is reached,
press the “+” button again, the interface will still display 5, and the 5 flashings will indicate that it is the
highest. After the assisted downshift reaches 0,press the “—” button again, the interface will still display 0,
and flash with 0 to indicate that the current is the lowest. The default gear position for the instrument is 1 file.
·
11
·
