◆ I
U stands for unit, 1 stands for imperial system, and 2 stands for metric system. The speed
and mileage units can be converted by the “+” or “-” buttons. Press the “i” button to
confirm. Press and hold the “i” button to confirm and exit the normal setting. The default
unit of the meter is metric.
General Parameter Settings
Press and hold the “+” and “-” buttons simultaneously for more than 2 seconds to enter the normal setting state. Press and hold the “-” and “i”
buttons simultaneously for more than 2 seconds to enter the wheel diameter setting interface.
◆
LD stands for wheel diameter and can be set to 16,18, 20, 22,24, 26,700C,28. Use the “+” or “-” buttons to select
the wheel diameter corresponding to the e-bike to ensure the accuracy of the meter speed display and mileage
display. The factory default wheel diameter value is 26inch.Short press the “i” button to enter the speed limit
setting interface.
◆
Wheel diameter setting interface
The default value of the highest riding speed of the instrument is 25 km/h.Change this value to set the maximum
riding speed of the electric vehicle. When the electric motor exceeds the set value, the controller will stop
supplying power to the motor to protect the rider.
Driving safety: LS means speed limit, the maximum speed setting value can be selected from 12 km/hto 40 km/h,
can be adjusted by + or “-” button; press “i” button confirm and exit the setup status.
·
14v
·
