21
Abnormal Current
24
Motor Hall Defect
22
Throttle Fault
25
Brake Failed or Brake Applied While Turning On
23
Motor Phase Problem
30
Abnormal Communication
When the error code is displayed, please promptly remove the fault. After the fault occurs, the electric bike will not be able to ride normally.
General Settings
Press and hold the power button to turn it on. In the power-on state, while the vehicle is stationary, press and hold the “+” and “-” buttons
simultaneously for more than 2 seconds,and the meter enters the normal setting state.
Each setting item needs to be carried out while the e-bikeis stationary.
◆
TC stands for clearing a single mileage. Y/N can be selected by pressing the “+” or “-” button, and Y means
clearing the single riding mileage. N means that the single riding distance is not cleared. Short press the “i”
button to confirm and enter the backlight brightness setting state.
◆
The single mileage clear operation interface bL represents the backlight. Parameters 1, 2, and 3 can be set to
indicate backlight brightness, 1 is the darkest, 2 is the standard brightness, and 3 is the brightest. The factory
default value is 1.Press the “+” or “-” button to change the backlight brightness parameter. Short press the “i”
button to confirm and enter the metric unit conversion setting state. Press and hold the “i” button to confirm
and exit the general setting state.
·
13
·
