EPE EPS-2000 Series, Руководство пользователя

Страница: 74 / 455

1
Owner’s
Manual
Input sensing circuit is not operating
correctly.
A fault has occurred in the
Charger power module.
The UPS is to the
AC because that
la outside 10% tolerance. Opera-
tion of the Static Switch
The is synchronized lo the
AC that
frequency is outside the
of the Static Switch is
The UPS is not synchronized to the
AC source
phase between the two is greater
than 3 degrees. Operation of the Static
is inhibited.
3.52 Alarms
are for the
Charger. and the UPS
3.5.2.1
Major Alarms
charger
when the Charger is
the UPS is load power
from the batteries This On is
on the UPS LCD display:
Display Reads:
The which thii
those listed below and ap-
pear the LCD after pressing the SCROLL
DOWN keypad.
has its and point of
the UPS is off.
Rectifier/Battery Charger has off due to
an input AC over- or under-voltage