EPE EPS-2000 Series, Руководство пользователя

Страница: 222 / 455

Owner’s manual
2.5 Installation Procedure
the final location for the unit. the leveling jacks an all four the
UPS (see Figure 6) to insure proper stability. The casters be least cff the
for the final installation.
Install the and rear grills that removed for shipment. The already
in place.
Before making any all upstream AC circuit breakers
or fused switches will with the UPS in the OFF Make certain the
EPS 2000 UPS AC Input Circuit Breaker and Breaker are in OFF
Make certain that the Maintenance Bypass is in the
(see the Figure below).
2.5.1 AC Input Connections
See for the location of input The are
phase. four wire Wye equipment ground: The phase sequence be A. C. The input
circuit breaker is Amperes. nominal AC current at nominal
is 34 Amperes. the Main Input Cables and upstream devices
2.5.2 UPS Output Load Connection
field wiring for the EPS UPS are made in the rear the UPS
enclosure (see Figure 7). To gain access area. the rear panel of the UPS
be
See for the of UPS The output
three phase. WYE plus equipment The phase be A. B. C. The
AC current rating the nominal Is SO.5 Amperes. She
cables and devices
NOTE
A three-wire DELTA load can connected to the UPS
connection be
I