EPE EPS-2000 Series, Руководство пользователя

Страница: 283 / 455

EPS 2000 11 UPS
l -
A.6
A.6.2 Output Distribution Panel
Installation
drawing provided the
and connection procedures.
Operation
The Remote panel has the same features and operates in the same
manner as the UPS System Status and Panel the
exception of the EPO function (none present). Refer to Section OPERATION,
for more detailed information.
There is no wfth this option.
Output
Distribution Options
Three of UPS output modules are available:
. Output Receptacles with Breakers
Output Panel
Panel and Receptacles with
Breakers
These optii in A4 and A-5. and separately below.
Output Options factory installed
and
require no user adjustments.
output cables and output circuit breakers (for Panels) are normally field
installed. Instructions for installing and output breakers are
after
descriptions of the individual output options.
Output end Breakers
One. or three Output Receptacles with Breaker modules are available. Each module houses
three specified receptacles. receptacle is protected by a breaker of
equivalent The module receptacles are in the rear of the UPS enclosure.
With the Output Distribution Panel option, a panel is at the output of
the UPS. The panel or plug-in breakers. of one. two. or poles. in
any up to the maximum of poles. The panel is located the rear of
the UPS enclosure.