EPE EPS-2000 Series, Руководство пользователя

Страница: 342 / 455

A.
DIFFERENCES TO 60 0 SERIES: TO
The 60 80 contain the following significant differences as compared to the 60
80 0 SERIES (note these are same characteristics as found on the 125 SERIES) as
- - - - - -
1. Model Number in the Model Number indicates
a. BPS-205
(Note that is 60 except for
b.
PERSONALIZATION MENU, Level 2 characterization.)
d.
e.
EPS-208
2.
a. Line-fed Rectifier at 480 series inductors power (208 input units
an internal auto-transformer).
b. Elevated DC Bus at 544 Vdc.
regulation feedback sensing is now on load side of the output
d. The output are between the and facilitate
e. If a 480V out is required, it is provided via an ACA-2000 an input isolation
(same for 600V applications).
3.
Mechanical
a. PCA by and
b. and CANU replaced by and (which contain the new operating
PCA (P/N 6730905) is selectable for use or use.
It
also allows the
Option to be used away.
d. AQCX and AQOX replaced by newer AQCF and AQOF (newer version
with although names).
Note that the 208 output requires AQOT also newer shorter version.
e. The AQCF PCA (new short P/N 6730864) has two jumpers that need to be set based upon the
DC Float Voltage or XXX).
The AQOF PCA (short version 6730884) suppresses the Analog Test during the DIAGNOSTICS
g. Bypass Surge Protector replaced by PULJ PCA
h. PAP Eliminated.
i. Long Ribbon Cable w/ferrite eliminated by
AQCX and AQOX into new Card Cage
Module PCA back plane (Card Cage relocated).
j. PCA must have a radiator with the new Card Cage Module.
k. Casters are standard on
Air is into the UPS base assembly.
m. 60 One DC Capacitor Bank
8
capacitors.
80 Two DC Capacitor Banks used, 6 capacitors each.
208
units use two AC capacitor banks.