EPE EPS-2000 Series, Руководство пользователя

Страница: 366 / 455

blank, however on line and
LED's still on.
Display contrast maybe low
Faulty AFIP PCA
Faulty TACO PCA
alarm
A> BPA ground fault
Smoke detector if present
Open input harmonic fuse if present
improper ground EPS cabinet
2 alarm EPS operating on diesel generator
IN
menu
level2
change RANGE" to 1.0
HZ. 0.5 HZ.
to Diesel generator AC source transfer, causes a break
transfer to bypass, LIMIT" alarm.
Reset by removing logic power (open
Customer to provide one contact from diesel generator or
ATS to EPS (Contact to close when EPS is operating
on diesel gen.) Set Personalization Menu level 1, "External
=
free running.
SEC. D
EPS-2000 GUIDE 1
not being recognized by firmware.
Hard wire not attached at contactor.
wire at CISJ PCA to 2
a wire from CISJ PCA to contactor aux
contact 13
a wire from CISJ PCA to contactor
contact 14
oscillating.
A> Replace T3 auto with an isolation type transformer
P/N 04-77274 refer to
harmonic fuses opening upon closing
A> 40 KVA, Up-grade from to
50 and 60 KVA to an
80 KVA to KVA to
and problems with various AQCX, AQOX,
ODUP Etc.
A> Change the SLIP PCA.