EPE EPS-2000 Series, Руководство пользователя

Страница: 55 / 455

Uninterruptible Power System
The Bypass Procedure is presented in detail in
2.7.3. The procedure is intended for
transfer of load to the Bypass AC
MAINS2 source without interruption to the load.
for maintenance
or for
verse transfer by returning the load to the UPS
(Return To
If the Bypass AC is of
these result in 0.3
second load interruption. and only be per-
formed with FORCED OFF or FORCED ON
The FORCED OFF FORCED
ON commands only he issued after enter-
This procedure assumes that the UPS is oper-
ating in a normal manner. with the lnverter
providing
power. The lnverter output must
power
332.6 Commands
ing the MENU keypad, the SCROLL
DOWN keypad four times, then the 6 keypad.
The COMMANDS Menu is to initiate
following operations:
l
Charger and Stop
lnverter Start and Stop
Clearing
Faults
l
UPS lnverter
l
Boost or Equalize Charging of the Battery
l
of Display Language
Instructions
function is being executed, the LCD will
display:
.
CHECKING . .
. . ACCEPTED . .
Charger Stop
The SCROLL UP and SCROLL DOWN key-
pads are used to select from the available
Procedures for are
below:
Brings up the Menu. Rectified
Battery Charger Is the first
on the menu.
To START
press:
To STOP the
Charger,
press:
lnverter and Stop
Press: Display Reads:
To START the press:
To STOP the press:
To memorized faults.