22
English
English
23
2. The display now shows
Tracking
. Press
repeatedly until
Del Sat
appears.
Press
.
☛
Del Sat
can only appear if there are satellites stored in the system.
3. The display shows
Sat
X, where X is the first satellite storage position to be deleted. Press
and
.
4. The display interchanges between
Sat
X and
Delete?
. To confirm, press
/ to aban-
don, press
.
5. If you chose ‘confirm’ the display shows
complete
for a brief moment. If you chose
‘abandon’, the display shows
cancel
.
6. In both cases, the display will return to
Del Sat
.
☛
If no further satellites are available for deletion, the display shows
Tracking
.
If there are more satellites in the system you wish to delete, press
and repeat from point 3! If
you want to leave the menu, press
until
quit
appears and then press
. The display shows
Setup
(flashing).
You are now back in the main menu and can switch to other satellites by pressing the
key or
make adjustments in the setup menu.
5. 4 Selection of stored satellites
The satellite tracking system is able to switch between stored satellite positions (see chapter 4)
either by using the control box or the receiver (automatic).
5. 4.1 Manual selection of satellites
To select a satellite manually, follow the below procedure:
1. Press
repeatedly until the display shows flashing
Sat
X, where X is the satellite storage
position.
2. Select between the storage positions 1 -4 by pressing
. Confirm with
.
☛
Only satellites already stored are shown.
The display interchanges between
scanning
and
Sat
X, where X is the desired storage posi-
tion. After the satellite is found, the display will continue to show X. The satellite tracking system
is now in TV mode.
5. 4. 2 Automatic selection of satellites
To select a satellite automatically, the receiver must support the DiSEqC ™ function. Further-
more, it is important that all satellites in the DiSEqC™ menu of the receiver and of the antenna
unit are stored under the same number!
☛
Example: Satellite Astra is stored under DiSEqC™ position 2 in the receiver, meaning that
this satellite has to be stored in the antenna unit under
Sat 2
.
1. Press
repeatedly until the display flashes
Auto Sat
. Press
. From now on, the an-
tenna unit will take over the satellite positions from the receiver. The display interchanges
between
scanning
and
Sat
X, where X is the desired storing position. After the satellite
is located, the display will continue to show
Sat
X. The satellite tracking system is now in
TV mode.
☛
If
Auto Sat
does not appear in the display, the feature is not supported by the receiver
(or not activated). The setting is “DiSEqC 1..4 ” or similar. Refer to the user manual of the
receiver. The TV45 does not support this feature.
If the selected satellite is not stored in the antenna unit, the display interchanges between
Sat
X
(the selected storage position) and
no Data
. In this case, check the receiver parameters and
store the satellite in the antenna unit, meaning that the search mode has to be started again (see
chapter 4).
You can now switch to the main menu (flashing display) by pressing the
key.
Содержание TV44
Страница 1: ...MANUAL HANDBUCH MANUALE BASIC LINE TV44 TV59...
Страница 18: ...HANDBUCH Basic Line TV44 TV59 Deutsch...
Страница 34: ...MANUAL Basic Line TV44 TV59 Espa ol...
Страница 51: ...MANUALE Basic Line TV44 TV59 Italiano...