EPAK-TV TV44, Руководство пользователя

Страница: 8 / 70

14
English English
15
3 Control elements
3.1 Control unit
The operation of the EPAK-TV system is controlled from the control unit. It is a good idea if you
make yourself familiar with the key functions and to memorize their usage in the menu struc-
ture:

Power key
: Short press will turn on the power or will enter Standby mode after initialization.
 Browse key:
Short press will browse through all available menus, step by step.
 Select key:
Short press will select/confirm what is written in the display.
Note! From the Standby mode: Hold Select key depressed while using the Browse
key to scroll through available data: serial no., counteroperation time, and soft-
ware versions. See section 6.3.
3. 2 Preparing the receiver
EPAK-TV does not need a special receiver. The satellite tracking system can be connected to any
commercial receiver for digital and analogue reception. Only the LNB-type in the setup menu of
the receiver has to be set on “Universal” (LOF 9,75/10,6 Ghz). If you want several satellite posi-
tions, the DiSEqC ™ function for an automatic satellite switch has to be activated.
To program your receiver, please refer to the respective owner’s manual!
☛ For every satellite at least one program must be preprogrammed in the receiver to control the
satellite position of the antenna unit by means of the TV picture quality. If not, preprogram
the receiver by using an already installed satellite system!
☛ In case the receiver supports the function, adjust the receiver so that the power supply of the
LNB is turned off during the standby-mode. This means that the control unit and the antenna
unit are without power supply. This function enables the turning on and off of the antenna unit
via remote control of the receiver, which lowers the power consumption.
☛ In case several receivers are connected to the antenna simultaneously (e.g. a digital receiver
with analogue receiver looped through) both receivers must have identical DiSEqC ™ set-
tings i.e. active or inactive.
3. 3 Power on /off /standby
The antenna unit is controlled by the control unit, which is turned on by pressing the

(power)
key. To enter Standby mode, press the

key from any menu after the initialization is completed.
☛ When the control unit is in standby mode there will be no power supply to the antenna.
3. 4 Password access to Setup menu
To gain access to the setup menu will require that you first enter a password. It is always the same
password which have to be entered. When
Setup is flashing in the display:
1. Press  The display will show: ----
2. Press  The display will show: X---
3. Press  The display will show: XX--
4. Press  The display will show: XXX-
5. Press  The display will show: XXXX
The time between each keystrokes should not exceed two seconds or the password request will
be annulled. If so, the display will return to a flashing
Setup and you will have to restart from
point 1. If the password is entered correctly, you are now in the Setup menu.
3. 5 Adjusting the setup parameters
Modifications can only be made in the setup menu. In the main menu only the flashing functions
can be selected.
1. Turn on the control unit. The display shows
Init (flashing), meaning initialization is in
progress.
2. After the initialization is completed, you are in the main menu with the display flashing
Setup . The setup menu has password access − see section 3.4.
3. If the password is entered correctly, you are now in the setup menu. The display shows
Tracking , press  to select.
4. Tracking is preset to On. Toggle between On and Off with the  key. With Off, tracking is
deactivated (see section 4.1). With On, tracking is activated i.e. the satellite can be tracked.
Press
 to select.
5. The display shows
Tracking
. Press  to go to
FastScan
mode. Press  to select
or  to continue from point 7.
6. Fastscan is preset to On . Toggle between On and Off with the  key (see section
6.4). With On, Fastscan is activated i.e. the search for the correct satellite works faster (US
only). Press
 to select.