EPAK-TV TV44, Руководство пользователя

Страница: 14 / 70

26
English English
27
APPENDICES
A Maintenance
The satellite tracking system EPAK-TV does not require a lot of maintenance. The following in-
structions are sufficient to sustain the optimal capacity of the antenna unit:
• Clean the radome once a month, using fresh water and a mild detergent to remove dirt and salt
deposits.
• Do not detach the radome!
• Do not spray directly on the radome with high pressure water from a hose!
• Check cable connections to be tight and free of corrosion. Clean the cables regularly.
The radome has a protective layer of UV-stabilized and maritime climate-proof lacquer. Do not
apply any additional paint, wax, preservative, solvent, chemicals or adhesive labels. Any kind of
coating will void warranty claims!
In case any solvent comes in contact with the radome by accident, rinse the area immediately with
water and, if necessary, with a mild detergent!
1) Always possible, as long as free satellite storage positions are available.
2) Only shown in the display if the respective satellite storage position is occupied.
3) Only the occupied satellite storage positions are shown.
4) Confirm function by pressing
 , abandon by pressing  .
5) Function has to be carried out in the harbor in calm waters.
6) Standby mode can quickly be reached from all menus by short press on the

key.
7) Display flashes.
8) TV46/60 models only, when at least one satellite is stored and the receiver supports this feature
(DiSEqC™).
9) Special functions in standby mode.
B Overview of menu structure
XXXXXXX T XXXXX VA X-XX VC X-XX
Standby
serial no.
Standby
AutoSat
Sat 1
Sat 2
Sat 3
Sat 4
Setup ---- Tracking On
Off
On
Off
FastScan
LNB Type
New Sat ScanBand? Band 1
Band 2
Band 3
Band 4
Search? New Sat
Upd Sat UpDate? Sat X
Del Sat Sat 1
Sat 2
Sat 3
Sat 4
cancel
Comp Cal UpDate? Compass
quit
6)
8)
2)
2)
2)
2)
searches and tracks stored satellite (Sat 1...4 will be selected by receiver)
searches and tracks stored satellite 1
searches and tracks stored satellite 2
searches and tracks stored satellite 3
searches and tracks stored satellite 4
9)
counter
operation time software version
antenna unit software version
control unit
settings of LNB-type and skew (angle)
1) 5)
LIN -70
LIN -60
LIN -10
LIN 0 (Standard)
LIN +10
LIN +20
LIN +70
Circular
Delete?
2)
2)
2)
2)
searching new satellite
7)
tracking of stored
satellite
durring searching
of stored satellites
update satellite data
4)
deletes selected satellite
3)
5)
calibrate compass
password
request