CommScope CMAX-DMW3060-43i53 Installation Manual Download

Page: 1 / 8

Installation Instruction for CMAX Antennas

Page 1

M0149AMD_Installation_CMAX-XXX-43X_Antennas

Installation Guide for CMAX Antennas

CMAX-DMW3060-43i53, CMAX-DMW2060-43i53,

CMAX-DMH30-43M-i53, CMAX-DMW60X-43i53)

CMAX-3060-43-US, CMAX-2060-43-US, CMAX-60X-43-US

Note: Please read the complete description before starting the installation. Make sure that

connectors are properly sealed against water if no cables are connected to them after

installation.

Tools required:

Wrenches

, width 10 mm

(We recommend using socket wrenches.)

1. Assembly

CMAX-DMW3060-43i53 / CMAX-3060-43-US

CMAX-DMW2060-43i53

CMAX-DMH30-43M-i53

CMAX-DMW60X-43i53 / CMAX-60X-43-US

CMAX-2060-43-US

Summary of Contents for CMAX-DMW3060-43i53

Page 2: ...as Page 2 Technical Support http www commscope com wisupport M0149AMD_Installation_CMAX XXX 43X_Antennas Fit the nine parts together and fasten with screws M6 nuts M6 spring washers and washers M6 torque 12Nm Washer Spring washer Nuts Screws ...

Page 3: ...nas 2 Wall Mounting 1 Use the pedestal piece to mark 4 holes onto the wall as shown in the drawing above or use a drill jig 2 Drill 4 holes into the wall and insert appropriate anchor bolt into holes 3 Attach the complete bracket with appropriate washers and nuts M6 not part of the delivery ...

Page 4: ...MD_Installation_CMAX XXX 43X_Antennas 3 Pole Mounting 40 80 mm pole diameter 1 Lay proper lashing straps around pole and lead them through mounting bracket 1 2 Adjust bracket in antenna direction and fasten the bracket 2 3 For poles with a smaller diameter use the closer holes 3 40 80mm Lashing Straps 2 1 3 ...

Page 5: ...nna Mounting Depending on the space required for the antenna the distance from the wall can be decreased with the lengthening piece Take out the lengthening piece if the antenna is small enough Screw joint antenna bracket Attach antenna and fasten it with washers and M6 nuts M6 torque 12 Nm Spring Washer M6 nut Washer or ...