24
Installation and Operating Instructions - EOS Herkules XL S120
Installation
EN
NOTICE
Malfunction due to damaged sensor
The temperature sensor is protected by its housing.
Ensure that the housing and the sensor are not damaged dur-
ing operation.
3.3 Specifications for the control unit
Observe the operating conditions for the control unit to ensure that the
sauna cabin's temperature control works properly. The installation site
must be selected accordingly. Specifications can be found in the installa-
tion instructions for the control unit or in the instructions provided by the
manufacturer of the control unit.
3.4 Mounting the sauna heater
The sauna heater is supplied mounted and packaged on a pallet. The side
panels of the sauna heater must be removed before the sauna heater can
be lifted from the pallet. The sauna heater is positioned closely to the des-
ignated installation location. The rear side must still be accessible so that
the electrical lines can be connected. It may be necessary to connect a
water supply line as well (Herkules XL S120 Vapor only). Once the lines are
connected, the sauna heater can be placed in its final location.
Four people should always transport the sauna heater.
NOTICE
Removal required for lifting the sauna heater
Material damage can occur if the sauna heater is lifted from the
side panels. The side panels cannot bear the weight of the sauna
heater.
Remove the side panels before the sauna heater is lifted manu-
ally.
Necessary steps:
Lifting the heater from the pallet,
Tool:
Screwdriver