19
GB
Connecting for the fi rst time
Once the installation is completed, turn the power on.
Depending on the length of storage of the unit the EOS-Logo appears briefl y
and the unit switches to standby mode,
or you are prompted by the display to make a few basic adjustments.
Operation / basic settings
You operate your electronic control unit with touch screen and intuitive user interface for
sauna and sauna with humidity operation by touching the displayed symbols or buttons on
the display.
The respective function is turned on by briefl y touching the respective image section.
When touching the respective image section for longer than 3 seconds the unit switches to
the set mode.
The adjustable value is shown in green or with a green border. By touching the surface
/
or the respective buttons the setting is changed. The changed setting will then be shown
in red or with a red border. Afterwards touch the area to save the new setting. The display
or border of the new setting changes from red to green.
If you do not change the setting within 15 seconds the unit automatically changes back to
the original state.
