18
GB
Default display Stand-by
Default display in operation
is shown if the system is in Stand-by mode.
The system also returns to this screen from
other menu items, if there is no activity for >15
seconds.
is displayed if the system is operational. The sys-
tem also returns to this screen from other menu
items, if there is no activity for >15 seconds.
Illustration of the heating performance:
During the heating phase the bars behind the
temperature display fi ll continuously.
Once the target temperature has been reached,
these bars are displayed as fi lled.
Energy-saving display
12:34
30°C
30°C
Current time
The clock symbol
The light symbol
(is the light is switched on)
12 : 00
Residual heat phase
(after damp operation)
Child lock active
Preselection time
If the unit is not used, it will switch into energy-
saving mode.
A moving time is shown after 5 minutes, simi-
lar to a PC screensaver. The back light for the
displa
y is switched off after an additional 15
minutes.
You can return to the basic standby screen by
pressing any button.
The following applies for all settings:
The following is shown in the top area of the
display:
Remote start module recognised
(flashes if contact to the module has
been interrupted in the meantime)
Rolling
doors
12:00
30°C
5 : 59
- - : - -
Temperatur
Auto-Stop
Vorwahlzeit
12:15
30°C
5 : 59
- - : - -
Temperatur
Auto-Stop
Vorwahlzeit
