20
GB
12:15
12:15
12:15
0
12:15
1
The cabin lighting can be dimmed and saves
this value separately for operation mode and
standby mode. To change the value for the
standby, press the light button in standby for
>3s until the light symbol appears with a bar
in the display. Now press the HIGH or DOWN
buttons repeatedly to set the value. Press the
button MODE for >3s to save the value. To set
the lighting when the sauna is operational, pro-
ceed in the same way even though the sauna
is activated (display has a black background).
Note: For reasons of safety, the brightness can
only be reduced to 25% in standby mode if this
is
lower than the brightness in operation mode!
There are four level settings for the fan in ope-
ration mode, level 0 corresponds to deactivati-
on of the fan in operation mode. This value is
entered when the system is commissioned for
the fi rst time, however it can be changed at a la-
ter time (see right). In the residual heat phase, a
connected fan is always operated at full power.
Fan
12:15
12
: 15
Time of day
MODE
&
12:15
0
MODE
> 3 s
MODE
> 3 s
MODE
> 3 s
12:00
30°C
5 : 59
- - : - -
Temperatur
Auto-Stop
Vorwahlzeit
