Enviro E20, Руководство пользователя

Страница: 28 / 40

Secondary Installation
L
og anD
g
Lass
b
uRneR
o
Ptions
:
The E20 has two seperate burner styles ro choose from; a log burner and a glass burner.
Figure 46: Burner Tray Installation.
Figure 47: Burner Tray Screws.
Installing the Log Burner:
1. Install the burner tray that comes with the kit into the E20 firebox by hanging the five holes on the
back side over the 5 screws that come through the rear of the firebox.
2. Secure the burner tray to the firebox by installing one screw on each side of the tray as shown in
Figure 47.
3. With the burner tray installed, refer to
s
econDary
I
nstallatIon
- F
Irebox
l
Iner
I
nstallatIon
and
s
econDary
I
nstallatIon
- l
og
s
et anD
e
mber
I
nstallatIon
to complete the Log Burner.
Installing the Glass Burner:
1. Install the burner tray that
comes with the kit into the E20
firebox by hanging the five holes
on the back side over the 5 screws
that come through the rear of the
firebox.
2. Install the pilot shield extension
as shown in Figure 48, the burner
has been removed for clarity. The
shield will fit around the outside of
the pilot shield that is installed in
the unit.
3. Secure the burner tray to the
firebox by installing one screw on
each side of the tray as shown in
Figure 47.
Figure 48: Pilot Shield Extension.
3. With the burner tray installed, refer to s
econDary
I
nstallatIon
- F
Irebox
l
Iner
I
nstallatIon
for
installing the firebox liners before moving on to the
next step.
9. Install the glass tray and secure it through the
burner using the screws provided with the kit (See
Figure 49).
10. Pour the glass beads into the tray and evenly
distribute over the entire tray (See Figure 50).
Figure 49: Glass Tray Screws.
Figure 50: Glass Beads in Place.
28